Directions for Use

QUICKLEEN-S: (Multi-Purpose Cleaner)


  1. Remove excess waste from the surface of the item to be cleaned

  2. Apply Quickleen-S using a damp cloth to the affected surface area (Yes, it’s perfectly fine to dab a damp cloth into the quickleen-s powder, it will not degrade the product)

  3. Gently Rub the cloth +Quickleen-S over the surface until tarnish or stain is removed from the affected area (work in the direction of the grain)

  4. Using a clean dry cloth, remove excess powder residue or rinse with water and dry thoroughly.

  5. For stubborn marks steps (1- 3) above may initially need to be repeated

Special Considerations: 
Do not rub the surface in circular movements as it can scratch the metal.
Always test a small inconspicuous area first.
Use a soft cloth rather than a sponge or paper towel.

For General Porcelain, Shower Screens and Tile cleaning 
dissolve 1-2 tablespoons of powder in a litre of hot water.
Stir the water once Quickleen has been added.
Wash the surface as you usually would


QUICKLEEN - R: (Rangehood Filter Cleaner)

Quickleen-R can a be irritating to skin - please use gloves to handle it.

For Rangehood filters / Cast-iron,

  1. Dissolve 2 tablespoons of Quickleen-R per 1 liter of hot water and stir until dissolved.

  2. Place the filter in the solution and move it around in the hot water. If you are able, let the hot water move through the filter for the best results.

  3. Rinse the filter with warm water and let it dry.

  4. Do not keep filter in solution for more than 10 minutes.

Additionally, Quickleen-R can be mixed as above and used in a spray bottle for cleaning of stubborn dirt & grime.